 |
ANE Rack &
Shelving, Inc. |
 |
|
Contact Us |
|
|
 |
Used Products |
|
|
| |
| Structural selective rack |
| |
| 
| 
| |
| Beams |
Deep Reach |
Uprights |
| |
|
Selective rack or single selective rack is one of the most common styles of pallet rack.
It is one pallet deep, typically 2-3 pallets per beam level, and multiple pallets high. Its
design allows access to all skus at any given time.
|
|
Structural: An ideal product for grocery, food service, and large high traffic warehouse operations.
Perfect for heavy loads (2000#’s and above), high pallet movements, and operations with more than 7
forklifts. The right product for seismic zone 4. This product is also available with "durability enhancements"
such as a boxed front column, rub rail, post protector, cantilever leg, and anchor protection (to guard against
shearing). Avoid costly shutdowns to replace damaged rollform applications. If you repair or replace rack more
than once a year, get a structural quote and get rack that will outlast your warehouse. Structural rack can truly
be the last rack you buy for your warehouse if properly designed. Please refer to our supplier’s brochure under
New Products Structural Selective Rack for more information.
|
|
Uprights: Common sizes for uprights start at 8’ tall and go as high in structural as 40’ tall. Common depths
for uprights are 24" (hand stack), 36" (hand stack and/or small pallets and/or turned pallet applications), 42" & 44"
& 48" (for typical 48" deep pallets). 42" and 44" are by far the most popular size for uprights because it allows for
a 48" deep pallet to overhang the beams by 2-3" on the front and back. Most structural uprights allow for adjustability
on every 1" increment with their 4" hole centers.
|
|
Beams: The most common size for load beams is 96" long. This length accommodates two 40" wide pallets
side by side. Load beams are available in a variety of capacities or face sizes, and are available in
the capacity ranges of 2500#’s or above. Other lengths that are available for load beams range from
48"-160" and are available in a variety of face sizes.
|
|
Accessories Other commonly used items for structural selective rack include wire mesh deck (see last
page), bolt-in pallet supports, row spacers (to maintain flue space on back to back and provide strength),
and column protectors (minimize column damage) in addition to the durability enhancements listed above.
|
|
|
|
|
|
